|
FPM Series Fuel Polishing Module
Prevent fuel system contamination - Daily preventative maintenance for diesel fuel.
The daily buildup of condensation in a diesel fuel system can lead to fuel contamination through bacteria growth. Parker's new Fuel Polishing Module combats the daily accumulation of water in diesel fuel systems, preventing corrosion and other system problems. Parker's FPM-050 is optimized to remove emulsified water from the fuel system, preventing common fuel issues and maximizing the effectiveness of current filters.
Features & Benefits:
- Provides maximum fuel system reliability by removing entrained moisture and accumulated contaminants.
- Keeps fuel dry, promoting a bacteria-free environment and preventing contaminant build-up.
- Reduces the need for expensive fuel treatments and additives.
- Uses solid state pump technology, consuming only 150 mA, minimizing battery drain and enabling continuous fuel maintenance. Can be run from a small solar panel.
- Allows for fuel maintenance during engine down time and off-season storage.
- Easy to install and operate; incorporates automatic, full-flow bypass valve, eliminatnig the need for manual switching.
Low Power Preventative Maintenance
The FPM-050's solid state pump consumes only 150mA at 12 VDC, less than 2 W of power. The FPM-050 can even be powered by a small, optional solar panel, leaving no net drain on your batteries. By installing the optional programmable controller, you can schedule preventative fuel maintenance. Simply program the FPM-050 to perform regular maintenance while you are away to keep fuel dry and to prevent contaminants from accumulating in the fuel system. Then, you can arrive confidently at the marina after weeks away and know that your fuel is freshly filtered and your boat is ready to get underway.
Retrofit into Virtually Any System!
This versatile fuel maintenance solution can be installed in multiple configurations to maximize reliability. The module is designed for easy retrofitting into existing diesel fuel systems, whether inline with the main fuel filter/water separator, or as part of a dedicated fuel maintenance loop. In either configuration, regular use of Parker's new FPM-050 while the engine is idle helps prevent contaminants from accumulating in the fuel system by continuously removing moisture from the fuel.
Price: $452.76
 |
